Installing Your New Vcr; Connections - JVC HM-DT100U Instructions Manual

12
EN

INSTALLING YOUR NEW VCR

Connections

Antenna or Cable for
digital broadcast
i.LINK IN/OUT HDMI OUT OPTICAL
DV IN
S400
D-THEATER
PCM/STREAM
REGION 1
DIGITAL AUDIO OUT
AC Outlet
NOTES:
•
VCR video output is not possible through RF connection. To view a tape or broadcast program, either analog (Component Video, S-
Video or Video) or digital (HDMI) video output must be connected.
•
HDMI will be automatically activated (HDMI-ON) when a HDMI connection has been made. To de-activate (HDMI-OFF), press
[HDMI] on the front panel and the [HDMI] LED will turn off.
During HDMI-ON ([HDMI] LED on), the image format output to the TV connected via the HDMI connector will be in accordance to
the image format of the TV. During HDMI-OFF ([HDMI] LED off), the image format output to the TV is in accordance to this VCR's
"IN/OUT FUNCTION" menu settings "TV OUTPUT 1" and "TV OUTPUT 2" (
displayed on the TV when using the HDMI to DVI connection, try setting HDMI to OFF.
If your TV is not High-Bandwidth Digital Content Protection (HDCP) compatible, the pictures will not be properly displayed on the
TV. In this case, use the component video, s-video or video connection.
•
If you have made a component video connection and your TV's component video connectors support only high definition signal
format, connect also the S-VIDEO or VIDEO connectors between the VCR and TV in order to view the picture of 480i image format
output from the VCR.
•
To ensure that you can record one show while watching another (
RF cable.
•
For full identification of the VCR's rear panel, refer to the Index (
Matching Transformer
(not supplied)
Coaxial Cable
To [ATSC IN]
ATSC IN
S-VIDEO S-VIDEO
VIDEO VIDEO
Y
L L
P B /C B
AUDIO AUDIO
CABLE BOX
P /C R R
R R
L-1 L-2
COMPONENT
VIDEO OUT OUTPUT INPUT REMOTE PAUSE/
AV COMPULINK
Back of VCR
To [S-VIDEO OUTPUT]
S-VIDEO
To [VIDEO OUTPUT]
VIDEO
To [AUDIO OUTPUT]
L
AUDIO
R
OUTPUT
To [COMPONENT
VIDEO OUT]
Component Video Cable (not supplied)
To [HDMI OUT]
When your TV has only DVI input, you can use a commercially available HDMI
to DVI conversion cable to connect between the VCR and your TV.
Also, connect the VCR's [AUDIO OUTPUT] to the TV's audio input connectors.
To [AUDIO OUTPUT]
To [HDMI OUT]
Flat Feeder
Coaxial Cable
To [ANTENNA IN]
(Antenna or cable input)
VHF/UHF
ANTENNA
IN
RF Cable (supplied)
OUT
ANTENNA
To [ANTENNA OUT]
S-Video Cable
(supplied)
Video Cable
OR
(not supplied)
Audio Cable
(supplied)
To Audio Input Connectors
To Component Video Connectors
HDMI Cable (not supplied)
Audio Cable (supplied)
HDMI to DVI conversion cable
(commercially available, not
supplied)
A
A
page 38), you must also connect the VCR to the TV using the
A
page 8).
INSTALLING YOUR NEW VCR
Antenna or Cable
TV (HD Ready)
To 75K terminal
To S-Video Input
Connector
To Video
Input Connector
To Audio Input Connectors
To DVI
connector
page 67). If the picture cannot be properly
To HDMI
Connector
DIGITAL IN
R
AUDIO
L
VIDEO