Workflow For Hardware Setup And Application Installation; Hardware Configuration Guidelines - HP xw8400 Workstation Hardware Setup Manual

Other Product Reference Guides
Autodesk Backburner Installation and
User's Guide
Autodesk Wiretap Web Installation and
User's Guide
Consult the Autodesk Web site at www.autodesk.com/discreet-documentation for the latest
version of all documents.

Workflow for Hardware Setup and Application Installation

The following procedure provides the general workflow for installing an Autodesk Effects or
Editing application on a Linux workstation.
To install an Effects or Editing application on a Linux workstation:
Review the guidelines for working with hardware components. See
1.
Configuration Guidelines"
Connect all peripherals (mouse, keyboard, Wacom® tablet, graphics monitor) to the proper
2.
ports, and connect your workstation to the Autodesk Wire network. See
Connection Diagrams"
3. Connect your workstation to Autodesk Stone Direct storage. See
page 15.
Connect a VTR and a broadcast monitor to your workstation. See
4.
in a 2K or HD Configuration"
Configuration"
Set up the audio hardware. See
5.
Perform the procedures in the Software Installation Guide for your product to install and
6.
license your Effects or Editing application, and to install Cleaner XL (if you are using
Cleaner XL with your Effects or Editing application).

Hardware Configuration Guidelines

In most cases, hardware integration and application installation is done on delivery by an
authorized technician, and some of the procedures in this guide may not be necessary. Still, it is

Workflow for Hardware Setup and Application Installation

Description
Information on how to install, set up, and use
Autodesk Backburner™
Information on how to install, set up, and use
Autodesk Wiretap™ Web
on page 3.
on page 11.
on page 18 or
on page 20.
Chapter 4, "Setting Up Audio Hardware,"
"Hardware
"Connecting Storage"
"Wiring Your HP xw8400
"Wiring Your HP xw8400 in an SD
"Peripherals
on
on page 33.
3