System Connections; Connection To A Satellite Tuner - JVC DD868EU Instructions Manual

44
EN
Connection To
A Satellite
Tuner
Outdoor Unit
Satellite Tuner Unit
DECODER VCR
Mains outlet
Back of Recorder
IMPORTANT
When you set "AV2 SELECT" to "SAT" (
if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press
TV/VCR on the remote control to turn off the VCR indicator on the display panel.
Satellite Cable
TV
pg. 39), it is possible to view a satellite broadcast with the TV set to its AV mode even

SYSTEM CONNECTIONS

If you don't have a decoder
Connect the satellite tuner to the video recorder's AV2 IN/
DECODER connector, then connect the recorder's AV1 IN/OUT
connector to the TV's 21-pin SCART connector.
NOTES:
Set "AV2 SELECT" to "AV2". (
You can use Automatic Satellite Program Recording function
( pg. 32) with this connection.
To view a programme via the satellite tuner, select L-2 mode
by pressing NUMBER keys and/or TV PROG so that
"L-2" appears on the display panel.
For details, refer to the instruction manual for the satellite
tuner.
Aerial
Aerial
connector
TV Aerial
cable
ANT. IN
RF OUT
21-pin AV input
connector (SCART)
SYNCHRO EDIT
AV1 IN/OUT L
AUDIO
OUT
R
AV2 IN/DECODER PAUSE
. . .
pg. 39)
Back of TV
JLIP
ANT. IN
RF OUT