Av2 Select Setting - JVC DD868EU Instructions Manual

A
TV Receiver Player
21-pin SCART Cable
(not provided)
VIDEO
CHAN-
RF Cable
NEL or
(provided)
AV mode
Recorder

AV2 SELECT Setting

Set "AV2 SELECT" to the appropriate mode depending on the type of unit connected to the
rear panel AV2 IN/DECODER connector of this recorder.
1
Press MENU to access the Main Menu screen.
Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or
2
Press %fi to move the highlight bar (pointer) to "AV2 SELECT".
3
#
4
Press OK or to select "AV2", "DECODER" or "SAT".
a–AV2 : To use this recorder as the recording deck with the player connected to the
AV2 IN/DECODER connector, or to use the satellite tuner connected to the
AV2 IN/DECODER connector.
b–DECODER : To use a decoder connected to the AV2 IN/DECODER connector.
c–SAT : To view a satellite programme with the TV set while the recorder is in Timer
mode, in Stop mode, recording or turned off. (
5
Press MENU to return to normal screen.
If you have a decoder connected to the AV2 IN/DECODER connector, be sure to set "AV2
SELECT" back to "DECODER" after editing.
If you're not connecting a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT"
set to "AV2".
The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut
or because the AC was removed from the recorder, "AV2" will be automatically selected when
the power is restored to the recorder. If you are using a decoder, be sure to set "AV2 SELECT"
back to "DECODER".
Your recorder
SYNCHRO EDIT JLIP
ANT. IN
AV1 IN/OUT L
AUDIO
OUT
R
AV2 IN/DECODER PAUSE
RF OUT
Another recorder
B
Recorder Your recorder
AV1 IN/OUT
AV2 IN/DECODER
21-pin SCART Cable
(not provided)
Another recorder
Player
#
.
pg. 44)
EN
TV Receiver
JLIP
SYNCHRO EDIT
ANT. IN
L
AUDIO
OUT
R
PAUSE
RF OUT
RF Cable
VIDEO
(provided)
CHANNEL
or AV
mode
MODE SET
B. E. S. T.
PICTURE CONTROL AUTO
AUTO TIMER
O. S. D.
DIRECT REC
AUTO SP=LP TIMER
POWER SAVE
NEXT PAGE
[5∞] =
[MENU] : EXIT
PREVIOUS PAGE
AV2 SELECT
COLOUR SYSTEM PAL/NTSC
TIME SCAN AUDIO
[5∞] =
[MENU] : EXIT
39
ON
OFF
ON
ON
OFF
OFF
AV2
ON