Table of Contents
Advertisement
High-Speed (Turbo) Search
ACTIVATE HIGH-SPEED
SEARCH
1
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
To resume normal playback, press PLAY.
NOTE:
For short searches, press and hold FF or REW for over 2 seconds
during playback or still picture. When released, normal playback
resumes.
Manual Tracking
Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PROG buttons.
OVERRIDE AUTOMATIC
TRACKING
1
Press
on the remote to engage manual tracking.
ADJUST TRACKING
MANUALLY
2
Press TV PROG + or – to adjust tracking.
RETURN TO AUTOMATIC
TRACKING
3
Press
on the remote to re-engage automatic
tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1
@
#
Press
or
(™ or £). "™ 1" or "£ 1" is
displayed on screen and search begins in the corre-
sponding direction.
To access index codes 2 through 9, press
repeatedly until the correct index number is displayed.
Ex.: To locate the beginning of B from the current
position, press
To locate the beginning of D from the current
position, press
A
–2
When the specified index code is located, playback
begins automatically.
Skip Search
SKIP OVER UNWANTED
SECTIONS
1
Press 30 SEC 1 to 4 times during playback. Each press
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
NOTES:
To return to normal playback during a Skip Search, press
PLAY.
It will be 9x normal playback speed with TimeScan (
during a Skip Search.
Skip Search does not work properly during NTSC playback.
Next Function Memory
The Next Function Memory "tells" the recorder what to do
after rewinding. Before continuing, make sure the recorder
is in the Stop mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press
EN
@
or
@
twice.
#
once.
Current position
B
C
D
E
F
–1
1
2
3
Index number
within 2 seconds.
(TIMER) within 2 seconds.
15
£ 2
#
pg. 18)
Hide quick links:
Advertisement
Table of Contents
