165X
Users Manual
No.
Annunciator
A
B
C
D
10
Displays the selected Memory mode. Memory modes are: Select (1), Store (2),
Recall (3), or Clear (4).
Configuration options. Settings you can make within the measurement functions. For
example, in the RCD Tripping Time function (
test current by x1/2, x1, x5 or AUTO and you can press 3 to select the type of RCD
you are testing.
Arrows above or below the terminal indicator symbol indicate reversed polarity.
Check the connection or check the wiring to correct.
Terminal indicator symbol. A terminal indicator symbol with a dot (d) in the center
indicates the terminal is used for the selected function. The terminals are:
•
L (Line)
•
PE (Protective Earth)
•
N (Neutral)
Meaning
T) you can press 2 to multiply the
∆