Adjusting The Ring And Listening Volume - ShoreTel 485g User Manual

1 Getting Started
2. To end the call, press the
The
Using a Headset to Answer a Call
If you plan to use a headset to answer calls, see
Headset
your default auto off-hook preference.
1. To answer a call using the headset, do one of the following:



2. To end the call, do one of the following:


The

Adjusting the Ring and Listening Volume

To adjust the volume on your phone, use the
handset, speakerphone, and headset are independent, and you can set them as follows:
Adjust the volume of your phone's ringer while the phone is on hook.

Adjust the handset listening volume while the handset is off hook.

Adjust the speakerphone volume when the

Adjust the headset listening volume when the

16 User Guide
button is no longer illuminated.
on page 37 for instructions for how to designate your wireless or wired regular headset as
If you use a wired headset, press the
If you use a wireless headset, go off-hook with your headset.
If your automatic off-hook preference is configured to use your headset, press the blinking
green call appearance button or press the Answer soft key. (If you use a wireless headset, the
phone then displays a message prompting you to press the off-hook button on your headset.)
The LED in the button lights green.
If you use a wired headset, press the
If you use a wireless headset, put your headset into the on-hook position.
button is no longer illuminated.
button again.
Changing Your Automatic Off-Hook Preference to
button.
button again.
buttons. The volume settings for the ringer,
button's LED is illuminated.
button's LED is illuminated.

Adjusting the Ring and Listening Volume

ShoreTel IP Phone 485g