Send message, forward to recipient's Find Me destination, if enabled
Send message, transfer to auto-attendant
Hanging up sends the message.
NOTE
Paging
If your phone and other phones at your site are configured for paging, you can
speak a message that will be heard on a connected speaker, usually overhead.
If you have access to the paging function (set by your administrator), dial the
number given to you by your administrator and wait for the confirmation
tone, then begin speaking into the handset. Hang up when you are finished.
If you hear an error tone when you try to page, paging may not be configured
at your site or you may not have the necessary permissions. Contact your
administrator.
Answering Calls
Ring tones and the flashing red LED light in the top right corner of your
phone identify an incoming call on your phone.
If the information is available, the caller' s name and number appear on your
display.
To answer the call, do one of the following:
Using the Handset
To answer a call, pick up the handset when the phone rings.
To end a call, hang up the handset.
Using the Speakerphone
To answer a call, press the Speakerphone button
lights green.
To end a call, press the Speakerphone button
Adjusting the Ring and Listening Volume
Pressing
and
The volume of your phone' s ringer while the handset is on hook and the
•
speakerphone is off. By pressing
volume off.
The listening volume while the handset is off hook.
•
The speakerphone volume, if the Speakerphone LED is illuminated.
•
on the Volume button adjusts:
. The LED in the button
again.
repeatedly, you can turn the ringer
9