Initial Sub Menu; How To Open The Initial Sub Menu; Description Of Initial Sub Menu - Furuno 1835 Operator's Manual

3. Use the Cursorpad (
4. Use the Cursorpad (
TER key.
5. Press the MENU key to close the menu.
1.41

Initial Sub Menu

The [Initial] sub menu in the [System] menu contains the items which allow you to cus-
tomize your radar to meet your needs.
1.41.1

How to open the Initial sub menu

1. Press the MENU key to open the menu.
2. Use the Cursorpad (
1.41.2

Description of Initial sub menu

[Key Beep]: When a key is pressed, a beep sounds. You can turn on or off this beep.
[Offcenter Speed]: Set the speed of your ship to calculate amount of your ship's off-
center. The setting range is 1-99 (kn).
[Compass Type]: Select the type of bearing sensor connected to the radar; [True]
(gyrocompass, satellite compass) or [Magnetic] (magnetic compass).
[Range Preset]: You can select the radar ranges. Select a range and press the EN-
TER key to switch on and off. At least two ranges must be turned on. The maximum
range available depends on the radar model. 0.0625 is not available in KM (kilome-
ters).
or ) to select [Echo Area] and press the ENTER key.
Echo Area options
or ) to select [Normal] or [Full Screen] then press the EN-
or ) to select [Initial] and press the ENTER key.
Initial sub menu
1. DESCRIPTION OF OPERATION
1-49