Gps Operation; Navigator Mode; Datum - Furuno 1835 Operator's Manual

5.

GPS OPERATION

If the FURUNO GPS Navigator GP-320B is connected to this radar, you can set GP-
320B from this radar.
5.1

Navigator Mode

1. Press the MENU key to open the menu.
2. Use the Cursorpad (
3. Use the Cursorpad (
4. Use the Cursorpad (
key.
5. Press the MENU key to close the menu.
5.2

Datum

Select the type of datum which matches the paper charts you use for navigation. Se-
lect [WGS-84] if the radar is connected to an AIS Transponder.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (
3. Use the Cursorpad (
4. Use the Cursorpad (
key. If you select [WGS-84] or [Tokyo], go to step 7. If you select [Other], go to the
next step.
5. Use the Cursorpad (
6. Use the Cursorpad (
key. (The setting range is 001 - 192 and 201 - 254. Refer to the appendix 2 "GEO-
DETIC CHART LIST".)
7. Press the MENU key to close the menu.
) to select [GPS] and press the ENTER key.
or
) to select [Mode] and press the ENTER key.
or
Mode options
) to select [GPS] or [WAAS] then press the ENTER
or
) to select [GPS] and press the ENTER key.
or
) to select [Datum] and press the ENTER key.
or
Datum options
) to select the type of datum and press the ENTER
or
) to select [Datum No] and press the ENTER key.
or
Datum No setting window
) to select the datum number and press the ENTER
or
5-1