Waypoint Marker; Alarm Message - Furuno 1835 Operator's Manual

1. DESCRIPTION OF OPERATION
1.38

Waypoint Marker

The waypoint marker shows the location of the destination waypoint set on a naviga-
tion plotter. The heading signal or course data are required. You can turn on/off the
waypoint marker as follows:
1. Press the MENU key to open the menu.
2. Use the Cursorpad (
3. Use the Cursorpad (
4. Use the Cursorpad (
5. Press the MENU key to close the menu.
1.39

Alarm Message

The alarm status window shows all currently violated alarms.
Note: The alarm status window is not automatically displayed when an alarm occurs.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (
1-46
+
Waypoint marker
or ) to select [Others] and press the ENTER key.
or ) to select [WPT Mark] and press the ENTER key.
WPT Mark options
or ) to select [Off] or [On] then press the ENTER key.
or ) to select [Alarm] and press the ENTER key.
Waypoint
marker