Using The Timers; Using The Daily Timer - JVC UX-S57 Instructions Manual

Using the Timers

Two timers are available—Daily Timer and Sleep Timer.
• Before using these timers, make sure the built-in clock is
set correctly (see page 9).

Using the Daily Timer

You can set the timer when the unit is either turned on or in
standby mode.
How the timer actually works
When the on-time comes, the unit automatically turns on (the
(timer) indicator flashes just before the on-time and
continues flashing while the timer is operating). Then, when
the off-time comes, the unit automatically turns off (standby).
The timer setting remains in memory until you change it.
• When the DAILY indicator is lit on the display, the timer
acts as the Daily Timer. Once the timer has been set, it will
be activated at the same time everyday until the timer is
turned off.
Before you start...
When using "TUNER" as the source to play, make sure to
select the desired station before turning off the power.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start again from step 1 .
On the remote control ONLY:
1
Press CLOCK/TIMER.
The (timer) indicator lights up and the timer
mode indicator (DAILY) flashes on the display.
The unit enters the on-time setting mode.
Ex.: When the Daily Timer has been selected
the last time.
2
Set the on-time you want the unit
to turn on.
1) Press DISC UP or
to set the hour, then press
CLOCK/TIMER.
2) Press DISC UP or
to set the minute, then press
CLOCK/TIMER.
The unit enters the off-time setting mode.
3
Set the off-time you want the unit
to turn off.
1) Press DISC UP or
to set the hour, then press
CLOCK/TIMER.
2) Press DISC UP or
to set the minute, then press
CLOCK/TIMER.
The unit enters the source setting mode.
Continued
CLOCK/
TIMER
DAILY
DISC UP
DISC DOWN
DISC DOWN
DISC DOWN
CLOCK/
TIMER
DAILY
DISC UP
DISC DOWN
DISC DOWN
DISC DOWN
CLOCK/
TIMER
DAILY
22