Adjusting The Tone; Changing The Display Brightness - JVC UX-S57 Instructions Manual

Adjusting the Tone

You can adjust the bass level (low frequency range) and the
treble level (high frequency range) within a range of "–5" to
"+5."
When shipped, each level is set to "+2."
• This function also affects the sound from headphones.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start again from step 1 .
On the remote control:
1
Press BASS to adjust the bass level or
press TREBLE to adjust the treble
level.
Ex.: When you select "BASS."
2
Press DISC UP to increase the
level or press DISC DOWN to
decrease the level.
On the unit:
1
Press BASS to adjust the bass
level or press TREBLE to
adjust the treble level.
2
Press ¢ UP to increase
the level or press 4 DOWN
to decrease the level.
BASS
Current setting
TREBLE
DISC UP
DISC DOWN
TREBLE
BASS

Changing the Display Brightness

You can change the display brightness only while the unit is
turned on.
On the remote control ONLY:
Press DIMMER while the unit is turned on.
• Each time you press the button, the display
brightness changes as follows:
DIMMER 1: The display illumination dims.
«
DIMMER 2: The display illumination dims and the
blue illumination on the display
«
disappears.
DIMMER OFF: The display and blue illumination
resumes.
«
(back to the beginning)
Turning off the unit (standby) sets the display brightness back to
"DIMMER OFF."
DIMMER
12