Using The Timers - JVC CA-D5T Instructions Manual

Using the Timers
=
2
=)
=
wi
STOP/CANCEL m
(label mae CLOCK/TIMER
SLEEP
>
However, we have only shown the items described in this section.
The timers lets you control recording and listening functions automatically.
Three types of timers are available:
OQ DAILY Timer — Wake up to music from any source.
ONCE REC (Recording) Timer — Unattended recording of radio broadcasts. You can set the
starting time and length of the recording.
SLEEP Timer — Fall asleep and have your CA-DST turn off automatically after a certain
length of time.
Clock Setting
The timers depend on the clock: the clock must be right for the timers to work as you expect.
Note that the clock must be set, or the timers cannot be set.
Setting the Clock
1. Press the CLOCK/TIMER button.
The SET button light comes on.
2. Set the hour by pressing the ¢<_ or >>! button.
Pressing the 41 button increase the hour, and pressing <4 button decrease it.
Holding down these buttons allows you to continuously adjust the hour setting until the button is
released.
C=) 3. Press the SET button.
Check that the hour setting is correct.
4. Set the mimutes by pressing the ¢< or >> button.
Pressing the 1 button increase the minute, and pressing <4 button decrease it.
Holding down these buttons allows you to continuously adjust the minute setting in 10 minute
increments until the button is released.
5. Press the SET button.
The SET button light goes out and the clock is set to the hour and minute you have selected
starting from zero seconds after "CLOCK OK" appears in the display.