Vision Fitness E3600HRC Assembly Manual page 4

1
BLACK BAG
STEP
• Install the rear foot with the four
bolts, using the Blue 5
wrench.
ORANGE BAG
2
STEP
• Slide the rubber cover onto the con-
sole mast.
• Unfold the wire and attach it to the
string located inside the mast. Guide
the wire up through the mast while
simultaneously sliding the mast onto
the frame bracket.
• Bolt the mast to the frame using the
two bolts and two washers; make sure
these are tight!
• Slide the rubber cover down over
the bolt heads.
MM
Allen
4
1
STEP
2
STEP