Accessing The Setup Program - Toshiba T3400 Maintenance Manual

3.22.2

Accessing the SETUP Program

Select 0 from the DIAGNOSTICS MENU and press Enter to display the following:
MEMORY
Total
Base
Extended
Shadow BIOS ROM =
DISPLAY
Display Adapter
LCD Display Mode =
LCD Gray Scale Level = Normal 64 Levels
Power On Display
COM/PCMCIA/FDD/PRT
Serial Port = COM1(IRQ4/3F8H)
PC Card Slot = PCMCIA
Ext.FDD/PRT = Printer
Printer Port Type
↑ ↓ → ←:
Select items, Space, BkSp : Change values
Esc: Exit without saving, Home: Set default values, End: Save changes and Exit
NOTE: LCD Gray Scale Level does not appear on the T3400CT screen. Power On
Display does not appear on the T3400. Panel Power On/Off appears when either
computer is in Resume mode.
Moving Within the SETUP Menu and Changing Values
Press ← and → to move between columns. Press ↑ and ↓ to move between items
1.
in a column.
2. Press the spacebar or BkSp to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes made.
If the changed item does not require a system re-boot, the following message is
displayed:
Are you sure? (Y/N)
If the changed item requires a system re-boot, the following message is displayed:
Are you sure? (Y/N)
Changes made will cause the system to re-boot.
2. To make other changes, press N. Repeat the steps above.
3-50
T3400 SETUP
= 4096 KB
= 640 KB
= 3328 KB
128 KB
= VGA compatible
Color
= Internal/External
= Output
BIOS version = x.xx
HARD DISK
Capacity = ***MB
POWER ON PASSWORD
Not Registered
OTHERS
Power-up Mode = Resume
CPU Cache = Enabled
Processing Speed = High
Battery Save Mode = Full Power
Speaker Volume = High
Panel Power On/Off = Enabled
Alarm Power On = Disabled
Boot Priority = Enabled
Pointing Devices = Simultaneous
Hotkey = Enabled
Ext. Keyboard "Fn" key equivalent
= Disabled
T3400, T3400CT