Toshiba Strata AirLink Installation Manual page 56

RWIU System Installation
Step 3: Determine Proper Strata DK Slot Configuration
Table 14
Second and third cabinet with B3CAU/CBU; or second through fifth cabinet with B5CAU/CBU
1. RWIU PCBs do not have to be installed in the order shown in this table. Example: If only one RWIU is
needed, it can be installed in any RWIU slot shown in the table so long as the slot is supported by the
installed processor.
2. The slot occupied by RWIU supports 8 handsets, for each additional 8 handsets an additional slot
adjacent to RWIU must be vacant.
Important!
46
Strata AirLink RWIU PCB Cabinet Slot Configuration
Handsets Slots
Needed Needed
Base Cabinet with any processor
1~8 1
9~16 2
17~24 3
24~32 4
33~40 5
41~48 6
Second cabinet with B2CAU/CBU processor
1~8 1
9~16 2
17~24 3
24~32 4
33~40 5
41~48 6
1~8 1
9~16 2
17~24 3
24~32 4
33~40 5
41~48 6
49~56 7
57~64 8
65~72 9
73~80 10
For Strata DK40i, if there are eight handsets, the RWIU can be installed in any of
the expansion cabinet slots (15, 16, and 18). If there are 16 handsets, the RWIU
must be installed in slot 15 and Slot 16 must be vacant. This system cannot support
24 or 32 handsets because of a port limitation.
RWIU PCBs
RWIU Cabinet Slot Placement
1
Needed
S103-RWIU1
1
S104-vacant
S105-RWIU2
2
S106-vacant*
S107-RWIU3
3
S108-vacant*
S201-RWIU1
1
S202-vacant
S203-RWIU2
2
S204-vacant
S205-RWIU3
3
S206-vacant
S_07-RWIU1
S_08-vacant
1
S_09-vacant
S_10-vacant
S_01-RWIU2
2
S_02-vacant
S_03-RWIU3
3
S_04-vacant
S_05-RWIU4
4
S_06-vacant
Strata AirLink Installation Guide
2
2
2
2
2
2
2
2
2
2
5/00