Alm Removal - Toshiba Strata AirLink Installation Manual

Table 10 BSIA Pinouts
Pair
1 Tip, ring — station 1
2 Tip, ring — station 2
3 Tip, ring — station 3
4 Tip, ring — station 4
5 Tip, ring — station 5
6 Tip, ring — station 6
7 Tip, ring — station 7
8 Tip, ring — station 8
9 Tip, ring — station 9
10 Tip, ring — station 10
11 Tip, ring — station 11
12 Tip, ring — station 12
13 Tip, ring — station 13
14 Tip, ring — station 14
15 Tip, ring — station 15
16 Tip, ring — station 16
20 Receive from Base Station 1
21 Transmit to Base Station 1
22 Tip, ring — external alarm connection
23 Tip, ring — external alarm connection
24 Receive from Base Station 2
25 Transmit to Base Station 2

ALM Removal

1. Power off the BSIA.
2. Remove the screws securing the cover of the BSIA case.
3. Lift the cover off of the BSIA.
4. Unplug connectors J4, J5, or J6.
Do not apply diagonal pressure to the DIN connectors
CAUTION!
20).
5. Disconnect the ALM from the standoffs on the BSIA PCB.
6. Gently lift the ALM out of the BSIA.
7. Replace the BSIA cover and re-install the screws.
Strata AirLink Installation Guide
P1
5/00
P2
Tip, ring — station 17
Tip, ring — station 18
Tip, ring — station 19
Tip, ring — station 20
Tip, ring — station 21
Tip, ring — station 22
Tip, ring — station 23
Tip, ring — station 24
Tip, ring — station 25
Tip, ring — station 26
Tip, ring — station 27
Tip, ring — station 28
Tip, ring — station 29
Tip, ring — station 30
Tip, ring — station 31
Tip, ring — station 32
(see Figure 16 on Page
BSIA System Installation
BSIA Additional Information
39