Rwiu System - Toshiba Strata AirLink Installation Manual
Digital business telephone systems
Hide thumbs
Also See for Strata AirLink:
- User manual (132 pages) ,
- User manual (131 pages) ,
- User manual (48 pages)
Table of Contents
Advertisement
Maintenance and Troubleshooting
Troubleshooting
RWIU System
LEDs
There are two LEDs for each Base Station jack on the WWIS, and two on the RWIU for the
external power jack and system. The Base Station LEDs are for the transmit and receive sides of
the Base Stations.
If the LEDs are OFF, they are linked and working. If they are ON, there could be a problem with
the cabling or battery. The power LED should be on and the system LED should be blinking. This
means that the system is properly linked and working.
If any Base Station is not used, its jumper on DIP switch S1 should be off. If S1 is on, the two
LEDs will remain lit and the RWIU will try to initialize that Base Station every 40 seconds.
Replace Defective Handset
1. From the Desktop toolbar,
click the Config icon.
2. Click General Settings.
3. Get current handset IDs.
4. Highlight the defective
handset ID and press Del.
5. Input the new handset ID.
6. Click OK.
7. Go off-hook and press
&$//
94
.
New ESN is locked to the RWIU.
3348
4149
Strata AirLink Installation Guide
5/00
Advertisement
Table of Contents
Troubleshooting
