Choosing A Pad To Edit - Roland V-Drums TD-20X Owner's Manual

Choosing a Pad to Edit

About the upper right display screen
indications
fig.00-005-snare.eps_70
In screens that allow you to edit specific settings for each
pad, the upper right of the display will show the trigger
number and name of the TRIGGER INPUT jack to which the
selected pad is connected.
The initial "H" or "R" indicates whether the settings are for the
pad's head (HEAD) or rim (RIM). Pressing the [PREVIEW]
button will play either the head or rim sound depending on
whether "H" or "R" is displayed.
The position indicated in the illustration below tells you
whether the edit screen is for the head or the rim.
fig.00-006-snare.eps_70
Choosing by hitting a pad
To edit the settings for a pad, strike that pad to select it.
To select the rim of a pad, strike the rim.
By pressing the [LOCK] button to make it light, you can
prevent the edited pad from being switched even if you
accidentally touch a different pad (p. 46).
Choosing pads from the TD-20X's top panel
fig.00-007_70
You can use the TRIG SELECT buttons to select a pad/sound
without needing to hit a pad and/or when a pad is not
connected.
Pressing the [1] button will select the next lower-numbered
trigger. Pressing the [15] button will select the next higher-
numbered trigger.
When using a dual trigger pad (with rim trigger) the [RIM]
button selects whether you're making settings for the head
or the rim of the selected pad.
When rim is selected, the [RIM] button will light.
Auditioning the sound of a pad
([PREVIEW] button)
Press the [PREVIEW] button to hear the sound of the selected
pad/sound using the TRIG SELECT buttons.
Overview
29