Copying The Drum Kit Chosen In Kit Selection; Viewing The Output Level (Ouput Monitor) [F2 (Out Mon)] - Roland V-Drums TD-20X Owner's Manual

Chapter 11. Other Functions [TOOLS]
3.
Use the function buttons, [CURSOR], [-] [+] buttons,
and [VALUE] dial to select the desired drum kit.
Function button
[F1 (LIST)] Displays a list of drum kits.
Copies the selected drum kit to a drum kit in
[F5 (COPY)]
user memory.
If you selected [F3 (CARD)] in step 2
[F2 (BANK -)] Selects the next-numbered backup.
[F3 (BANK +)] Selects the previous-numbered backup.
By holding down the [SHIFT] button and pressing the
[KIT] button, you can access a screen where the
CompactFlash card is selected as the drum kit selection
location.
4.
Play the drum kit.
Now you can play the drum kit that shows in the screen.
This function is cancelled if you exit the "KIT SELECTION"
screen.
Copying the Drum Kit Chosen in Kit
Selection
1.
Select a drum kit as described in steps 1–3 of
"Playing a Kit from the CompactFlash without
Loading It (Kit Selection) [F1 (KIT SEL)]" (p. 121).
fig.11-004-prekit-copy.eps_70
2.
Press the [F5 (COPY)] button.
3.
Use the [-] [+] buttons or [VALUE] dial to select the
copy-destination drum kit.
122
4.
Press the [F5 (COPY)] button.
A confirmation message will appear.
fig.11-005-prekit-copy-conf.eps_70
If you decide to cancel the copy or exchange, press the [F1
(CANCEL)] button.
5.
Press the [F5 (EXECUTE)] button to execute.
When copying has been completed, Kit Selection will be
cancelled, and the "DRUM KIT" screen will appear with the
copied drum kit selected.
Viewing the Output Level
(OUPUT MONITOR)
[F2 (OUT MON)]
You can view the volume that is being output from the
MASTER OUT, PHONES, or DIRECT OUT jacks.
1.
In the "TOOLS A" screen (p. 121), press the [F2 (OUT
MON)] button.
The "OUTPUT MONITOR" screen appears.
fig.11-006-mon.eps_70
2.
Use the [-] [+] buttons or the [VALUE] dial to select
the output.
3.
Press the [EXIT] button to return to the "TOOLS A"
screen.
You can also access the "OUTPUT MONITOR" screen by
pressing the [KIT] button and then pressing the [F2
(FUNC)] button (p. 41).