Britax Baby Safety Capsule Instructions For Installation & Use page 9

HOW TO SET-UP
1. Outer crotch strap slot.
2. Middle crotch strap slot.
3. Inner crotch strap slot.
4. Lap strap slot.
5. Harness tongues & buckle.
6. Shoulder harness strap.
7. Lower shoulder strap slots.
8. Upper shoulder strap slots.
9. Shoulder Height Marker.
F. If the baby is new born you will need to use either slot 7 or 8. With the baby in the carrier,
check that the slot 7 is just above the baby's shoulder. If the strap is not in that slot then
change the slot as described on the next page. If the slot is just above the shoulders then
go to page 18.
G. Lift cover at boss end to reveal
where shoulder harness straps are
threaded through the Carrier body
NOTE: Illustration shows shoulder harness straps positioned for a smaller baby. Cover is cut
away for clarity.
16
- Series number: 2030/A/2010
Instructions for Installation & Use
Boss Boss
8
9
7
6
5
4
3
2
1
H. Unthread the strap from the strap
connector and push through the lower slot
as shown.
I. Removing any twists, rethread the strap
through upper slot in cover and Carrier.
Re-attach to the strap connector.
J. Repeat for other shoulder strap and
ensure that both straps are in the same
position through the cover and the Carrier.
Instructions for Installation & Use
HOW TO SET-UP
Lower Slots
Upper Slots
- Series number: 2030/A/2010
17