Britax Baby Safety Capsule Instructions For Installation & Use page 10

HOW TO SET-UP
SHOULDER HARNESS STRAPS:
The shoulder straps must be in the slots which are nearest to the child's shoulders, but not
lower than the child's shoulders (see diagram above) then the shoulder harness straps must
be repositioned to the next slots for a larger baby.
When the child's shoulders reach the shoulder height marker discontinue using this restraint
and move to the next type of child restraint see page 32.
FOR LARGER BABY
IMPORTANT:
Do not use the carrier with the harness shoulder straps set at different heights or fed through
mismatching slots. Ensure the harness straps are not twisted and that all straps are secured
by pulling each harness strap.
18
- Series number: 2030/A/2010
Instructions for Installation & Use
FOR SMALL BABY
Make sure that no
straps are trapped
between restraint
body and harness
shoulder strap.
CROTCH STRAP
The crotch strap can be moved to the next position to accommodate a growing baby but
needs to be in line with the baby's crotch area to securely position baby correctly into the
Carrier.
FOR SMALL BABY
FOR GROWING BABY
Crotch
buckle
Inner
slot
Middle slot
Outer slot
ADJUSTMENT OF CROTCH STRAP
A. Lift cover to reveal crotch strap slot.
B. From underneath Carrier turn the crotch 3-bar
slide and push through slot as shown, then turn
and push through the next slot making sure that
the crotch 3-bar slide is flat against the body of
the Carrier.
IMPORTANT:
When replacing cover, ensure none of the harness straps are twisted and that all straps are
secure by pulling each harness strap.
CAUTION:
Do not use the Baby Safety Capsule with harness shoulder straps set at different heights or
fed through mis-matching slots.
Instructions for Installation & Use
HOW TO SET-UP
FOR LARGER BABY
Crotch
Crotch
buckle
buckle
Inner slot
Inner slot
Middle slot
Middle slot
Outer slot
Outer slot
Cover
Middle
Carrier
slot
Body
Outer
Crotch 3-bar
slot
Slide (inner slot)
- Series number: 2030/A/2010
19