Britax Baby Safety Capsule Instructions For Installation & Use page 14

HOW TO USE
D. Remove Harness Tongues from elastic side bands. Place each arm through each
shoulder strap of the harness. Position the buckle of the crotch strap as shown below.
Tongue
Buckle
E
E. Fit either harness tongue into the harness buckle followed by the other tongue until a
click is heard. Should the second tongue not insert - press the red button and reinsert the
tongues. Ensure secure engagement by pulling harness straps.
Pull to remove
slack from
harness shoulder
straps
F
CAUTION: A LOOSE HARNESS IS DANGEROUS.
26
- Series number: 2030/A/2010
Instructions for Installation & Use
Click
Shoulder Straps
Harness Lap Straps
Crotch Straps
F. Ensure slack is removed from shoulder
harness strap by pulling lap straps then pull
the Harness Adjustment Strap to take up the
slack in the harness adjusting to a firm but
comfortable fit. Make sure that nothing is
obstructing the harness straps and that baby's
arms and legs are free. Check that slack in
straps is minimal. Do not use the restraint if
straps do not tighten and contact your local
authorised service agent for repair.
CAUTION:
A LOOSE HARNESS IS DANGEROUS.
Instructions for Installation & Use
HOW TO USE
Pull Harness Adjustment
Strap to remove slack.
27
- Series number: 2030/A/2010