Mastering Remote Operations - JVC RX-E100SL Instructions Manual

Mastering Remote Operations

You can use the remote control to operate not only this
receiver but also other JVC products.
• Refer also to the manuals supplied for the other products.
– This remote control can operate a VCR whose remote
control code is set to A code.
• To operate the other products, aim the remote control
directly at the remote sensor on the target product.
Turning on the Power — POWER buttons
POWER
DVD TV
DVD
: Turn on or off a JVC DVD player.
TV
: Turn on or off a JVC TV.
VCR
: Turn on or off a JVC VCR.
AUDIO
: Turn on or off this receiver.
Adjusting the volume — VOLUME buttons
(see also page 8)
Adjust the volume level.
+
VOLUME
–
32
VCR AUDIO
Selecting the source — Source selecting
buttons (see also page 8)
DVD
TV
CD
DVD : Select the DVD player.
TV : Select the TV.
VCR : Select the VCR.
CD : Select the CD player.
FM : Select the FM band.
AM : Select the AM band.
These buttons also change the functions of the 10 keys, and
make them work to operate the target source components. (See
the next page.)
Selecting analog or digital input
— INPUT A/D button (see also page 11)
INPUT A/D
Select either analog input or digital input for
the digital source.
Turning off the sound temporarily
— MUTING button (see also page 9)
MUTING
Turn on or off the sound output.
Creating realistic sound fields — SURROUND
and DSP MODE buttons (see also pages 24 – 28)
SURROUND
SURROUND : Turn on or off Surround
DSP MODE : Select the DSP modes
DSP MODE
Adjusting the sound — SOUND button
(see also pages 18, 19, 25, 27, 28)
SOUND
Change the functions of 10 keys, and make
them work for sound adjustments.
Turning off the receiver automatically
— SLEEP button (see also page 9)
Set the shut-off time until the receiver turns
SLEEP
off automatically.
VCR
FM
AM
mode.
(Theater Surround and DAP
modes). Each time you press
the button, the DSP modes
change.