Adjusting The Tone; Adjusting The Subwoofer Output Level - JVC RX-E100SL Instructions Manual

Adjusting the Tone

You can adjust the bass and treble sounds as you like.
• You have to make these adjustments for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press ADJUST.
The CONTROL buttons now work for sound
ADJUST
adjustments.
2
Press CONTROL ∞ (or 5) repeatedly until
"BASS" or "TREBLE" (with the current
setting) appears.
*
CONTROL
ANALOG L C R PRO LOGIC
LPCM DSP
SUBWFR LFE
DGTL AUTO
DOLBY D
LS S RS
DTS INPUT ATT
BASS
: To adjust the bass.
TREBLE : To adjust the treble.
* "0" is the initial setting. If you have already changed the
setting, another number (level) will be shown.
3
Press CONTROL 3 or 2 to adjust the sound
level.
CONTROL
ANALOG L C R PRO LOGIC
LPCM DSP
SUBWFR LFE
DGTL AUTO
DOLBY D
LS S RS
DTS INPUT ATT
Ex.: When adjusting the bass level
• Pressing CONTROL 3 increases the sound level by +2 steps
(from –10 to +10).
• Pressing CONTROL 2 decreases the sound level by –2 steps
(from +10 to –10).
4 2 3
Repeat steps and
level.
Remote
NOT
VOL
VOL
to adjust the other sound

Adjusting the Subwoofer Output Level

You can adjust the subwoofer output level if you have connected a
subwoofer and set the subwoofer information correctly – "YES."
• You have to make this adjustment for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press ADJUST.
The CONTROL buttons now work for sound
ADJUST
adjustments.
2
Press CONTROL ∞ (or 5) repeatedly until
"SUBWFR (subwoofer)" (with the current
setting) appears.
*
CONTROL
OGIC
AUTO
ATT
* "0" is the initial setting. If you have already changed the
setting, another number (level) will be shown.
3
Press CONTROL 3 or 2 to adjust the sound
output level.
CONTROL
PRO LOGIC
ANALOG L C R
LPCM DSP
SUBWFR LFE
DOLBY D DGTL AUTO
LS S RS
DTS INPUT ATT
• Pressing CONTROL 3 increases the sound output level
(from –10 to +10).
• Pressing CONTROL 2 decreases the sound output level
(from +10 to –10).
When using the remote control
1 Press SOUND.
10 keys now work for sound adjustments.
2 Press SUBWOOFER +/– to adjust the sound output level
(from –10 to +10).
VOL
VOL
19