Using Surround Modes (Front Panel) - JVC RX-E100SL Instructions Manual

STANDBY
POWER
D I G I T A L
S U R R O U N D
IMPORTANT
To view the pictures on the TV, connect the video
components directly to the TV, and select an appropriate
input on the TV.
Before you start, remember...
• Make sure that you have set the speaker information correctly
(see page 12).
• You cannot adjust the center speaker output level when you have
set "CTR SP" to "NO."
• You cannot adjust the rear speaker output levels when you have set
"REAR SP" to "NO."

Using Surround Modes (Front Panel)

Surround mode cannot be used with another DSP mode. Once
Surround mode is activated, the other DSP mode in use will be
canceled.
When using the buttons on the front panel, no test tone is available.
Make adjustments while listening to the sound of the source played
back.
• You have to make this adjustment for each source.
1
Select and play software encoded with Dolby
Surround, Dolby Digital, or DTS Digital
Surround.
If "AUTO SR (Auto Surround)" is set to "ON"
Playing a digital source automatically activates an appropriate
Surround mode. (See page 16.)
CONTROL
5/∞/3/2
RX-E100
TV DILECT
ANALOG L C R PRO LOGIC
CONTROL
LPCM DSP
SUBWFR LFE
DOLBY D DGTL AUTO
LS S RS
DTS INPUT ATT
ADJUST MEMORY
SETTING
DVD DVD TV
D I G I T A L
ADJUST
Display
HOME THEATER RECEIVER
SLEEP TUNED ST AUTO MUTING
MH
Z
KH
Z
INPUT SURROUND
VOL
ON/OFF
ANALOG/DIGITAL
INPUT ATT
VCR CD FM AM
SURROUND
ON/OFF
When using the remote control for DSP operations,
see pages 25 to 28.
2
Press SURROUND ON/OFF to activate an
appropriate Surround mode — Pro Logic, Dolby
Digital, or DTS Digital Surround.
• Each time you press the button, Surround mode turns on and
off alternately.
SURROUND
ON/OFF
AUTO
AUTO
Note:
When playing back an analog source, "SURROUND ON" will not
appear, and "PRO LOGIC" appears as soon as you press
SURROUND. (The PRO LOGIC indicator also lights up on the
display.)
3
Press ADJUST.
The CONTROL buttons now work for sound
ADJUST
adjustments.
4
Press CONTROL ∞ (or 5) repeatedly until one
of the following indications (with the current
setting) appears.
*
CONTROL
ANALOG L C R PRO LOGIC
LPCM DSP
SUBWFR LFE
DOLBY D DGTL AUTO
LS S RS
DTS INPUT ATT
TO BE CONTINUED ON THE NEXT PAGE
DSP
MODE
MASTER VOLUME
Then
Ex.: When Dolby Digital is activated
VOL
VOL
VOL
29