JVC RX-E100SL Instructions Manual page 9

Illustrations of the input/output terminals below are typical examples.
When you connect other components, refer also to their manuals since the terminal names actually printed
on the rear vary among the components.
A
COAXIAL
DIGITAL OUT
B
OPTICAL
DIGITAL OUT
C
AUDIO OUT
AUDIO OUT
FRONT/MIX
LINE OUT
RIGHT
AUDIO
OUT IN
LEFT
RIGHT
LEFT
RIGHT
LEFT
LEFT
RIGHT
DVD
• When shipped from the factory, the DIGITAL IN
terminals have been set for use with the
following components.
– DIGITAL 1 (coaxial): For DVD player
– DIGITAL 2 (optical): For digital TV tuner
If you connect other components, change the
digital input (DIGITAL IN) terminal setting
TV
correctly. See "Setting the Digital Input
Terminals" on page 10.
• Select the digital input mode correctly.
See "Selecting the Analog or Digital Input
Mode" on page 11.
• Connect the video input directly to the video
output on the DVD player and/or VCR.
• You can also connect the digital TV tuner using
TV the optical digital cable (see above).
DVD
CD
VCR
• Connect the video out directly to the
video input on the TV.
• To enjoy the software encoded with
Dolby Digital or DTS Digital
Surround, connect the DVD player
using one of the DIGITAL IN
terminals (see above).
You can also connect the CD player
using one of the DIGITAL IN terminals
(see above).
Connect the video out directly to the
video input on the TV.
7