Reassembly Front / Frame - Sony Ericsson P900 Working Instruction, Mechanical

2 Reassembly Front / Frame

Tools
•
Screwdriver
•
Blunt Pair of tweezers
Instruction
Use gloves!
#
1
2
3/000 21-1/FEA 209 544/85 A

Sony Ericsson Mobile Communications AB
Figure
Fig 2.1.1
Fig 2.1.2
Fig 2.2.1
Fig. 2.2.2
Fig 2.2.3
Instruction
Make sure there is no dust
and small particles left in the
frame cavity.
Place the Jog dial flex film in
the proper position there is a
guide pin in the frame and a
hole in the flex film at the
arrow. Fig 2.1.1
Mount the Camera grommet
according to the Fig 2.1.2
Note the guiding pins in the
circles.
Mount the LCD cushions 1
and 2 according to the fig
2.2.1
Mount the LCD contact at the
PCB with your fingers. Fig
2.2
The LCD shall be turned to
the other side of the PCB
after the contact has been
mounted Fig 2.2.1
Working Instructions, Mechanical
Note
The contact on the flex
film must be in the proper
position to make it possible
to fit into the contact at the
PCB.
The camera grommet must
be in the correct position to
make it possible to fit the
PCB in proper position.
6(26)