Camera Flex Assembly Removal - Sony Ericsson W888c Work Instructions

Working Instruction Repair Instruction Mechanical/3/000 21-1/FEA 209 544/123, Mechanical

2.1.6 Camera Flex Assembly Removal

Using the flat end of a nylon pointer, disconnect the camera
flex assembly from the SIM flex.
Insert the tip of a pair of tweezers in the hole in the camera
flex assembly indicated.
Do not insert the tip of the tweezers through the smaller
hole at the bottom of the hole in the camera flex
assembly. This can cause damage to the back cover.
Rotate the tweezers away for the LCD. The camera flex
assembly will lift from its cavity in the back cover.
T .
HE VOLUME KEY MAY FALL OUT
: Preliminary 15(65)
State Rev 4
© Sony Ericsson Mobile Communications AB