Working Instruction Repair Instruction Mechanical/3/000 21-1/FEA 209 544/123, Mechanical
Lock the dome foil assembly into place by snapping the
assembly under the two latches indicated.
4.1.4 Front Cover Installation
Make sure the keypad is properly positioned in the front
cover and that the keypad is pressed down around each of
its four placement pins.
Place the front cover over the rest of the phone.
Verify that the two screw bosses indicated insert into their
corresponding holes in the camera flex assembly.
Squeeze the two covers together and inspect the outside
seam of the phone. There should be no gaps around the
seam.
: Preliminary
61(65)
State
Rev 4
© Sony Ericsson Mobile Communications AB