Table of Contents
Advertisement
Working Instruction Repair Instruction Mechanical/3/000 21-1/FEA 209 544/123, Mechanical
Apply pressure over the entire surface of the co-brand label
to make sure it is well adhered.
No reassembly required.
3.17 Back Cover
Perform sections 2.1.1-2.1.6 of the disassembly procedure.
Obtain a new back cover.
Obtain a new SIM flex film and remove the protective
backing from the three areas of the SIM Flex indicated.
Position the backup battery portion of the SIM flex within its
alignment features on the back cover.
: Preliminary
40(65)
State
Rev 4
© Sony Ericsson Mobile Communications AB
Advertisement
Table of Contents
