Final Reduction Gear Oil; Drive Belt - KYMCO People GT 300i Service Manual

3. INSPECTION/ADJUSTMENT
People GT 300i

FINAL REDUCTION GEAR OIL

• Place the scooter on its main stand on
level ground.
Remove the transmission fluid drain bolt.
Remove the transmission fluid filler bolt, then
slowly rotate the rear wheel to drain the fluid.
Fill the transmission with the recommend fluid
to the capacity listed below.
Oil Drain Bolt
Transmission fluid type: SAE 90
Transmission fluid capacity: 0.23 L
Transmission fluid exchanging
capacity: 0.21 L
Install the transmission filler bolt and tighten it
to the specified torque.

DRIVE BELT

Oil Filler Bolt
Remove the left crankcase cover.
Inspect the drive belt for cracks or excessive
wear.
Replace the drive belt with a new one if
necessary and in accordance with the
Maintenance Schedule.
Drive Belt
3-8