Installing The Dvd Cable - IBM System x3550 M3 Type 4254 Problem Determination And Service Manual

7. From the front of the server, grasp the cable connector latch and slide it up
8. Remove the cable from the optical drive cage connector and set it aside.
9. If you are instructed to return the DVD drive, follow all packaging instructions,

Installing the DVD cable

To install the DVD cable, complete the following cable:
230
IBM System x3550 M3 Types 4254 and 7944: Problem Determination and Service Guide
Attention: You must press the connector release tab in order to disconnect
the DVD cable from the system board. Do not disconnect the DVD cable by
using excessive force.
toward the fan bracket; then, press the spring latch (right of the cable
connector) and slide the cable connector to the right.
Cable
connector
latch
and use any packaging materials for shipping that are supplied to you.
Spring latch
on DVD
drive cage