Nikon D50 Repair Manual page 82

VBA12001-R.3668.A
<Start-up of Program>
1. Double-click the file (D50.EXE), then Inspection and adjustment program for D50 starts.
2. To display in Japanese, select the radio button "JAPANESE" in "LANGUAGE" in the lower right-hand
corner of the screen.
3. When the "HISTORY" button at the lower-left is pressed, the program version will be displayed.
4. Select each item button according to operation.
Follow the instructions on the next screen that will be shown after pressing the item button.
5. To finish the program, press the "Close (×)" button in the right-hand corner of the screen or "QUIT.".
- Ａ47 ･ -