< How to install USB driver >
If this program is used by the USB interface, installing the USB driver is necessary.
But if the OS is "Windows XP", the driver is already preloaded so it is not necessary to install it.
1. Set the USB of camera to "PTP".
(SETUP menu → USB setting → PTP)
2. Connect the camera and PC by USB cable.
Turn camera ON.
3. When "Add New Hardware Wizard" is displayed, click "Next".
4. Select "Search for a better drive than the one your device is using now. (Recommended)", and click "Next".
5. Check the box of "Specify a location" and select "¥D50¥D50SOFT¥PTPControl " of C drive. Then click "Next".
- A44 ・
-
VBA12001-R.3668.A