Nikon D50 Repair Manual page 53

Bottom wires
・ Arrange wires.
・ Attach 2 pieces of tape (#715).
Arrange 4 wires of the DC/DC PCB properly
by put each into between bosses as shown
above.
SB-PCBwires
・ Solder 4 wires of DC/DC PCB unit.
Black
Red
Yellow
Blue
AF adjustment holes.
Be careful that some PCBs at the inital stage of mass-production have
different colored wire.
Black
Red
Blown
Blue
- Ａ18 ･
Put 2 of 4 wires each into
between bosses.
To keep wires from covering the AF adjustment
holes, attach 2 pieces of tape (#715).
Black
Red
Blown
Red
White marking is
painted for
identification.
-
VBA12001-R.3668.A