Superio Device - SOYO SY-P4I875P DRAGON 2 V1.0 User Manual

BIOS Setup Utility

3-5.2 SuperIO Device

Caution: Change these settings only if you are already familiar
with the Chipset.
The [SuperIO Device] option changes the values of the Super I/O controller.
The following screen shows setup default settings.
POWER ON Function
x KB Power ON Password
x Hot Key Power ON
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
x UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
PWRON After PWR-Fail
:Move Enter:Select
F5:Previous Values
After you have completed the changes, press [Esc] and follow the instructions
on your screen to save your settings or exit without saving.
Phoenix – Award BIOS CMOS Setup Utility
SuperIO Device
BUTTON ONLY
Enter
Ctrl-F1
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Half
378/IRQ7
SPP
3
OFF
+/-/PU/PD:Value
F6:Fail-Safe Defaults
SY-P4I875P DRAGON 2 V1.0
Menu Level
F10:Save ESC:Exit
72
Item Help
F1:General Help
F7: Optimized Defaults