Chapter 6 Ali M5281 Driver Installation - SOYO SY-P4I875P DRAGON 2 V1.0 User Manual

Highpoint HPT372 Driver Installation
ALI M5281 DRIVER INSTALLATION
You can use your IDE 3/ IDE4 as
1. Normal IDE function.
2. RAID function. (RAID0, 1, 0+1)
To use IDE3 and IDE4 as normal IDE, please do the following steps
1. Go to the CMOS setup
Device
2. Install the ALi M5281 driver, see driver installation instruction
below.
To use IDE3 and IDE4 as RAID controller, please do the following steps
1. Connect 2 hard disk on IDE3/4, set them both as master.
2. Go to the CMOS setup
Device
3. Go to the CMOS setup
"First Boot Device" to "Other Device".
4. Set the "Other Device Boot Order" to "IDE3/IDE4,SCSI".
5. Press "Ctrl+A" when the ALi M5281 BIOS summary screen
appears.
6. Create a disk array, check appendix A for create instructions.
7. Install the ALi M5281 driver. See driver installation instruction
below.
To boot from the ALi M5281 controller, (IDE 3 or IDE 4)
1. Go to the CMOS setup
First Boot Device to "Other Device".
2. Set the "Other Device boot order" to "IDE3/IDE4,SCSI".
Chapter 6
and set the "RAID IDE 3,4/ SATA3,4" to "Enable".
and set the "RAID IDE 3,4/ SATA3,4" to "Enable".
SY-P4I875P DRAGON 2 V1.0
SOYO COMBO Feature
SOYO COMBO Feature
SOYO COMBO Feature
SOYO COMBO Feature
98
Onboard
Onboard
and set the
and set the