Typematic Settings - SOYO SY-P4I875P DRAGON 2 V1.0 User Manual

BIOS Setup Utility
Boot Up Num Lock Status
Boot Up Num
Lock Status
Gate A20 Options
Gate A20
Options

Typematic Settings

Typematic
Rate Setting
The following [Typematic Rate] and [Typematic Delay] fields are active
only if [Typematic Rate Setting] is set to [Enabled]
Typematic Rate
Typematic Delay
Setting
On Numeric keypad in numeric mode
at boot-up.
Off Puts numeric keypad in arrow key
mode at boot-up.
Setting
Normal A pin in the keyboard controller
controls GateA20.
Fast Lets the chipset control GateA20. Default
Setting
Disabled
Enabled
6 (Char/sec)
8 (Char/sec)
10 (Char/sec)
12 (Char/sec)
15 (Char/sec)
20 (Char/sec)
24 (Char/sec)
30 (Char/sec)
250 (msec)
500 (msec)
750 (msec)
1000 (msec)
SY-P4I875P DRAGON 2 V1.0
Description
Description
Description
Keystrokes repeat at a rate
determined by the
keyboard.
When enabled , the
typematic rate and
typematic delay can be
selected.
Choose the rate at which a
character is repeated when
holding down a key.
Choose how long after you
press a key down the
character begins repeating.
65
Note
Default
Note
Note
Default
Default
Default