Connecting Speakers - JVC MX-GT90 Instructions Manual

AM antenna
ANTENNA
1
AM EXT
AM LOOP
FM 75
COAXIAL
2
AM loop antenna
(supplied)
1
Connect the AM loop antenna to the AM
LOOP terminals as illustrated.
• If the AM loop antenna wire is covered
with vinyl, remove the vinyl by twisting
it as shown in the diagram.
2
Turn the AM loop antenna until you have the
best reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire
to the AM EXT terminal and extend it horizontally. (The AM
loop antenna must remain connected.)
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
Vinyl-covered wire
(not supplied)
– 7 –

Connecting Speakers

For MX-GT90 and MX-GT80:
DO NOT carry the speaker by holding the duct
tube (on the top of the speaker).
1
Speaker cords
(red/black)
RIGHT
Black
RIGHT
Speaker cords
(blue/black)
From front
right speaker
From right
subwoofer
3
2
Red
Speaker cords
SUBWOOFERS
(red/black)
LEFT
Black
LEFT
MAIN
SPEAKERS
CAUTION: SPEAKER
IMPEDANCE
6 16
Blue
From front
left speaker
From left
subwoofer