Connecting The Speakers And Subwoofer - JVC NX-F7 Instructions Manual

NX-F3_NX-F7[A]EN-03.fm Page 6 Wednesday, April 23, 2008 9:28 AM

Connecting the speakers and subwoofer

Connect the speakers to the main unit by connecting the colored connectors to the same color terminals on
the rear of the main unit.
Right speaker
(rear view)
Speaker cable
(3.5 m)
■ IMPORTANT
• Improper speaker cable connection reduces the
stereo effect and sound quality.
• The supplied left/right speakers are magnetically
shielded, but color irregularity may occur on the
TV depending on some conditions. To prevent
color irregularity, set up the speakers following
the instructions below.
(The subwoofer is not magnetically shielded.)
1. Turn off the main power of the TV before
setting up the speakers.
2. Place the speakers enough distance from the
TV so that they do not cause color irregularity
on the TV.
3. Wait for approximately 30 minutes before
turning on the main power of the TV again.
Red
Main unit (rear view)
Gray
Subwoofer
Speaker cable (3 m)
(rear view)
White
Speaker cable
(3.5 m)
Blue
Purple
CAUTION
• The supplied speakers are manufactured exclu-
sively for use with the supplied main unit as
parts of the NX-F7/NX-F3 system. Do not con-
nect the supplied speakers to devices other than
the supplied main unit. Doing so may damage
the speakers.
• Do not connect external speakers together with
the supplied speakers. The change in imped-
ance may damage the main unit and the speak-
ers.
You can detach the speaker cover.
(Only for NX-F7)
Left speaker
(rear view)
Speaker cover
6