Connecting Speakers - JVC MX-C55C Instructions Manual

AM antenna
1
AM loop antenna
(supplied)
1
Connect the AM antenna to the AM terminal
on the rear of the unit.
2
Turn the AM loop antenna until you have the
best reception.
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
7
2

Connecting Speakers

DO NOT carry the speaker by holding the tube
duct (on the top of the speaker).
1
Blue
Speaker cord
(blue/black)
Black
Red
Speaker cord
(red/black)
From right From right
main
subwoofer's
speaker's
terminals
terminals
1
Press and hold the clamp of the speaker
terminal on the rear of the unit.
2
Insert the end of the speaker cord into the
terminal.
Match the colors (polarity): Blue (+) to blue (+) and black
(–) to black (–); red (+) to red (+) and black (–) to black
(–).
3
Release the finger from the clamp.
IMPORTANT:
• Use only speakers with the same speaker impedance as
indicated by the speaker terminals on the rear of the
unit.
• DO NOT connect more than one speaker to one speaker
terminal.
2, 3
Speaker cord
(blue/black)
Black
From left From left
subwoofer's main
terminals speaker's
terminals