Using The Timers; Using Daily Timer - JVC MX-C55C Instructions Manual

Using the Timers

There are two kinds of timers available—Daily Timer and
Sleep Timer.
Before using the timers, you need to set the clock built in the
unit. (See "Setting the Clock" on page 9.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or
radio program. You can set the timer whether the unit is on or
off.
How Daily Timer actually works
The unit automatically turns on, sets the volume level to the
preset level, and starts playing the specified source when the
on-time comes (the indicator flashes while the timer is
operating). Then, when the off-time comes, the unit
automatically turns off (stands by).
Daily Timer works every day unless you cancel it.
• There is a time limit in proceeding the following steps. If the
setting is canceled before you finish, start from step 1 again.
Before you start...
• When using the tuner as the source to play:
— Make sure to preset a station you want to listen.
page 12.)
• When using a CD as the source to play:
— Make sure there is a CD you want to play on the tray
currently selected.
• When using the external component as the source to
play:
— Set the timer equipped with the external component
at the same time.
On the remote control ONLY:
1
Press CLOCK/TIMER repeatedly
until "TIMER" appears on the
display.
"TIMER" appears on the display for a
second, then enters into the on-time setting mode.
• Each time you press the button, the clock/timer setting
modes change as follows:
DAILY
(Daily Timer)
Canceled
(See
CLOCK
TIMER
2
Set the on-time you want
the unit to turn on.
1 Press ¢ /` or 4 /1
the hour, then press SET.
2 Press ¢ /` or 4 /1 to set the
minute, then press SET.
"OFF TIME" appears. Press SET to
enter into off-time setting mode.
3
Set the off-time you want
the unit to turn off (on
standby).
1 Press ¢ /` or 4 /1
the hour, then press SET.
2 Press ¢ /` or 4 /1 to set the
minute, then press SET.
The unit enters source selecting mode.
4
¢ /`
Press or
to select the source to play,
then press SET.
TUNER FM : tunes in to a specified preset FM station.
= go to step 5 .
TUNER AM : tunes in to a specified preset AM station.
= go to step 5 .
CD : plays the current disc from the first track.
= go to step 6 .
AUX : plays an external source.
= go to step 6 .
USB
: plays an external source via USB.
= go to step 6 .
Continued
to set
to set
4 /1
22