Advanced Cd Operations - JVC MX-C55C Instructions Manual

One disc playback
When 2 or 3 CDs are loaded on the disc trays, you can
select one particular disc to be played back.
On the remote control ONLY:
1
Load CDs.
• If the current playing source is not CD, press CD 6,
then 7 before going to the next step.
2
Press REPEAT repeatedly so that
the 1DISC indicator lights up on the
display.
3
Press one of the disc number
buttons (DISC1, DISC2 or
DISC3) you want to playback.
Playback stops when all tracks of the selected disc are
played once and resumes to All disc play.
To stop playback, press 7.
• For MP3/WMA disc, this unit can store the number of the
track that you have stopped playback. By pressing
CD 3 (CD 6 on the remote control), you can start
playback again from the beginning of the same track—
Resume play (see also page 17).
To remove the disc, press 0.
To exit from One disc playback, press REPEAT
repeatedly so that ALL DISC indicator lights up on the
display.
The following operations will also cancel the One disc
playback and restore All disc playback
• When the playback is stopped.
• When the unit is turned off.
• When the carrousel is opened.
• When the playing source is changed.
15

Advanced CD Operations

During the playback of CD, the following operations are
available.
To skip to the another CD in the carrousel
Press DISC SKIP on the unit.
To stop playback for a moment
During playback, press 8.
"PAUSE" appears on the display.
1DISC indicator
To resume playback, press CD 3.
When using the remote control, press CD 3/8.
To locate a particular point of a track
During playback, press and hold ` or
1
.
• `: Fast forwards the disc.
• 1 : Fast reverses the disc.
When using the remote control, press
and
To go to another track
For Audio CD:
Turn the PRESET +/–, ¢ /4
control.
• ¢
: Skips to the beginning of the
• 4
: Goes back to the beginning of
When using the remote control, press
¢ /`
The selected track starts playback.
¢ /` or 4 /1 .
hold
next or succeeding tracks.
the current or previous tracks.
4 /1 .
or
If you turn the PRESET +/–, ¢ /4 control (press
¢ /` or 4 /1 on the remote control) to select a
track while in stop mode
DISC SKIP