Developing Unit; Photoconductor Unit - Epson AcuLaser M2000D Service Manual

EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN
A1 B1
C1 D1
Top Cover
1. Open the Top Cover.
2. Open the Front Cover.
3. Pull the Developing Unit toward you to remove it.
The following operations must be carried out after the Developing Unit has been
A D J U S T M E N T
R E Q U I R E D
replaced with a new one.
1. Install the toner cartridge for initial filling supplied with the Developing Unit.
2. Turn the printer on while holding down [Start/Stop] and [Information] buttons.
The printer will start up in toner filling mode.
3. When the toner filling is completed, remove the toner cartridge for initial filling,
and install the toner cartridge in use.
DISASSEMBLY AND ASSEMBLY

Developing Unit

Developing Unit
Front Cover
Main Unit Disassembly/Reassembly
B2
C2 D2
1. Pull the Photoconductor Unit toward you to remove it.
Revision B

Photoconductor Unit

Photoconductor Unit
84
Confidential