Cleaning Instructions - Epson AcuLaser M2000D Service Manual

EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN
6.1 Cleaning
Clean the parts listed in the table below according to the printer condition.
Table 6-1. Cleaning
Unit Cleaning point
Main unit Printer exterior surface
Inside of the unit
Charging wire
Paper feed roller & Separation roller
(Standard cassette)
Paper feed roller & Separation roller
(MP tray)
Optional Paper feed roller & Separation roller
cassette unit (Optional cassette unit)
Make sure to turn the power switch OFF and unplug the power
code before cleaning to avoid electric shock, burn or any other
injuries.
Do not use alcohol, thinner, or any other solvents.
Be extremely careful not to make the internal parts of the
printer get wet.
A hard brush or cloth can scratch the product. Do not use them
to wipe the product.
MAINTENANCE
;
Clean the point when
The surface is contaminated.
Servicing
Print quality problem occurs.
An abnormality is observed in paper
feeding/conveying operations.
Paper jam frequently occurs
Paper cannot be fed normally
Cleaning
MAIN UNIT
Printer exterior surface
Wipe the surface clean with a cloth wrung out of water.
Figure 6-1. Cleaning the Printer Surface
Inside of the printer
Remove the Developing unit and the photoconductor unit, and wipe off any paper
dust or dirt inside the printer with a dry soft cloth.
Figure 6-2. Inside of the printer
Revision B
151
Confidential