EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN
B4
C4
PF Paper Feed Clutch
A
Tab and Rotation
Stopper
1. Release the cables from the three clamps and disconnect the relay connector.
2. Remove the two screws that secure the grounding terminal, and remove the metal plate.
A) Silver / M3x6 / S-Tite: Two pieces
3. Remove the PF Paper Feed Clutch.
Connect the connector to the relay connector connected to the white cable.
Match the tab of the metal plate with the Rotation Stopper of the Paper Feed Clutch.
The grounding terminals should be screwed with the metal plate.
DISASSEMBLY AND ASSEMBLY
PF Paper Feed Clutch
Clamps
Relay Connector
A
Main Unit Disassembly/Reassembly
C5
A
PF Paper
Conveyance Clutch
Tab and
Rotation Stopper
1. Release the cables from the clamp and disconnect the relay connector.
2. Remove the two screws, and remove the metal plate.
A) Silver / M3x6 / S-Tite: Two pieces
3. Remove the PF Paper Conveyance Clutch.
Connect the connector to the relay connector connected to the black cable.
Match the tab of the metal plate with the Rotation Stopper of the Paper
Conveyance Clutch.
Revision B
PF Paper Conveyance Clutch
Clamp
Relay Connector
A
Confidential
135