Boiler
Side Panels
Side Panels
(front)
18
Vitocrossal 200 CM2 Installation Instructions
Note: Adjust the side panels to line up with the front
panel A before securing with screws.
1. Install rear right side panel. Observe aligning notches
and cutouts.
2. Secure rear right panel to top rail with two 4.8 metal
screws.
3. Install middle right side panel. Observe aligning
notches and cutouts.
4. Secure middle right panel to top rail with two 4.8
metal screws.
5. Install rear left side panel. Observe aligning notches
and cutouts.
6. Secure rear left panel to top rail with two 4.8 metal
screws.
7. Install middle left side panel. Observe aligning notches
and cutouts.
8. Secure middle left panel to top rail with two 4.8 metal
screws.
1. Insert spring clips A facing downwards into cut outs
of right and left front side panels.
2. Install right front side panel to bottom rail. Observe
aligning notches and cutouts.
3. Install right front side panel to middle side panel.
Observe clips and cutouts.
4. Install left front side panel to bottom rail. Observe
aligning notches and cutouts.
5. Install left front side panel to middle side panel.
Observe clips and cutouts.
6. Secure both front panels to the top rails with two M5
screws.
Legend
A Clips (included in the accessories package).