Pre-Assembling The Side Panels - Viessmann Vitocrossal 200 Installation Instructions For Contractors
Gas condensing boiler for open flue and room sealed operation
Hide thumbs
Also See for Vitocrossal 200:
- Service instructions manual (96 pages) ,
- Service instructions for contractors (88 pages) ,
- Instructions manual (72 pages)
Table of Contents
Advertisement
Fitting the thermal insulation and casing
Pre-assembling the side panels
Fig. 8
1. Lay the side panels for the front, centre and back
on a suitable surface (e.g. packaging materials)
and align.
(cont.)
2. Secure the guide rails (with sliding profile) to the
side panels with screws through the installation
holes.
13
Advertisement
Table of Contents
